| Honda Motorcycle Mirrors If you're going to screw it, make sure it's big enough! The screw-in type mirrors are usually fitted to bikes without fairings. There are two size being 8mm or 10mm thread fitting with a standard right hand thread (Clockwise). However, Yamaha uses a right hand thread on the left and a left hand (Anti-clockwise) thread on the right but again these will be 8mm or 10mm. There's also one or 2 Honda models that have a similar setup to Yamaha so be careful when buying replacement mirrors. If you're replacing fairing mirrors, check that the fixing mount hole centres in the description match your originals and also check that the image is a good enough likeness. If you cannot find your part on this or one of the following pages, we may have neglected to add it here or have just not yet found the time to update this category. Select your bike model from the Honda category to the left of this page. We also have parts for other manufacturers which you will find in the parts by type categories |
